Vintage New Holland Hay Rake Parts

For New Holland 55 Rake Parts Click Here

New Holland® is a Registered Trademark of CNH Industrial America LLC, which does not manufacture or endorse these parts.

It would be data-prohibitive to list each individual part with shipping. Therefore, shipping & handling are based on an average purchase of a few parts. We do charge a minimum of $14.50 flat base rate on all items regardless of size. This is to cover the cost of processing, packing, drop-ship, and actual shipping charges.

Additional shipping may be required for larger orders, including truck freight. We will let you know if additional shipping will be needed. If you check out using PayPal, we can send you an invoice if needed. Otherwise, we will also need to have credit card information, as our system does not store it with the order.

Prices are subject to change without notice.

Please select one part per page.  Add it to the cart and then return for more parts on the same page.

Please expect 1-4 weeks for the parts to ship. The Amish shops do not use computers or more modern communication, so orders take a bit longer to receive, package, and ship. We are not able to maintain an electronic inventory of parts, as the shops also sell to Amish machine shops across the country. Occasionally, new parts will need to be made before the order can be shipped.

Page 1

JM134262 Hitch and Jack Assembly   

JM136638 Cast Assembly (for Rake Dolly) (does not fit the 260 Contact us for a used assembly.)

JM136639 Tongue for Rake Dolly 

JM136642 Axle for Rake Dolly 

JM139019 258 Star 

JM139125 Lift Bearing Assembly Fits 256, 258, 259, and 260 only  

JM139125A Lift Bearing Assembly Fits 55 and 56 only  

JM139125B Lift Bearing Assembly Bushing TS114PT162 Bushing

JM139138 258 Ball Pivot 

JM139141 Connector Plate At JM139138 

JM139153 Clutch Cable 

JM143024 258 Bar Dust Cap 

JM139078 Stabilizer Bar with Bushing (not pictured)

Page 2

JM172856A Aftermarket Replacement Seal Goes in 258 bar ends package. 

JM181991 Hydraulic Motor Star Seal  

JM182196 Dust Guard Fits on JM48149 

JM187065 Arm Lift 

JM204041 Lift Spring

JM258 Bar End Complete Package Fits 258, 259, 260  

JM258S Sealed Bar End Bearing Package 

JM280744 Short Neck Carriage Bolt For on steel teeth 

JM32383 Wheel Lug Bolt 

JM33781 Crank Knob 

JM33914 Clutch Cable Lever (On Front) 

JM48138 Tine Bar Bearing comes with a dust shield. Fits all 56, 256 rakes 

JM48138A Bolt Only 

JM48149 Star Hub with Dust Shield 

Page 3

JM48155 256 Star 

JM48219 256 Star  Support

JM48315 LH Rake Crank – Long 

JM48316 RH Rake Crank – Short 

JM48329 Link Block Lift 

JM34025 Link Block Bushing Only 

JM616780 Snap Ring 256 Bar End 

JM63086 Ring Closure 

JM641627 258 Bar Pin 

JM64562 Steel Rake Tooth 

JM646694 258 Rake Bar  (You should expect additional shipping to be between $200- $400 because of the length and location. A commercial address is the most economical)

JM 67015 RH Star Spindle on Model 56 only 

JM704386 Crank Nut without Thread 

JM707750 Crank Nut with Thread 

JM718013 Bar Bearing Bushing 

JM792493 Steel Rake Tooth Clip 

Page 4

JM8046 56B Bar Thick as 258, but fits only 56B Rakes 

JM8047 6 x 22 Diamond Plate Wheels - 4 Lug Hub Center. We use smaller diameter wheels for better raking performance! 

JM8049 Complete Hydraulic Drive Kit with Motor and Hoses to Tractor. Specify Length in Comment Box.

Hoses are 3 ft longer for a dolly wheel rake. Always specify! 

JM8050 Hydraulic Hoses and Fittings 

JM8051 Hydraulic Motor (1" Diameter Shaft)

JM8052 Hydraulic Motor Bracket 

JM8053 Hydraulic Motor Coupler 

JM8054 Hydraulic Motor Star Bearings – 67048 China 

JM8055 Hydraulic Motor Star Race – 67010 China 

JM8056 Hydraulic Motor Star Bracket 

JM8057 Hydraulic Motor Star Shaft 

JM8057A Engine Mount Brackets 

JM8058 Hydraulic Unit with Honda Engine to Mount on Rake 8HP or 13 HP (email for price)

JM8059 258 Bar End Only to weld to your old bar 

JM8060 256 Bar End Only to weld to your old bar

JM8061 NH Rake Dolly complete with wheels and cast assembly. (ships truck freight) (The cast assembly will not fit 260; contact us for a used assembly if needed for a 260 rake)

JM8061A Complete Front Dolly Wheel 

JM8062 NH Rake Dolly without wheels 

Page 5

NH 56, 256, 258, 260 Front Axle Assembly. See Diagram for corresponding item numbers.

#1 JM48253 FRONT AXLE  

# 2 JM289671 3/8 x 2½ GR8 Bolt, Nut, Lockwasher 

#3 JM139050 RH UNIVERSAL – (Uses 675 Series C&B Kit) (see below*)

*#5 JM139842 675 CROSS & BEARING KIT 

#5a JM80711 LUBE NIPPLE – 65 Degree, 1/8" NPT x 7/8" lg 

#6 JM139112 SPINDLE – RH for 256 & 258 (Same part for LH on Model 260), Complete 

#6a JM10 COTTER PIN 

#7 JM86837915 SLOTTED NUT  

#8 JM46876 OIL SEAL – Oil 

#9 JM36726C BEARING CONE – LM67048 China Bearing 

#10 JM36723C BEARING CUP – LM67010 China Race 

#11 JM143467 BEARING HOUSING – RH 

#11a JM87974 BOLT – Hex 1/2" x 3 GR5 HH Bolt, lock washer, nut  

#12 JM143469 BEARING HOUSING – LH 

#13 JM48281 DOG – RH (LH on Model 260) 

#14 JM48283 CLEVIS PIN 

#15 JM35949 SPRING – Dog, RH (LH on Model 260) 

#16 JM179492 HUB – Wheel, Includes (2) ref. 17 

JM87414 LUBE NIPPLE – 1/4" - 28 NPT 

#17 JM257702 1½ BUSHING – OD measurement 1-1/2 x 1-1/2" O.D. x 1-1/4" I.D.

#17a JM65930 1⅜ BUSHING – OD measurement 

#18 JM64972 11/4 SMALL RIM MACHINERY WASHER 

#19 JM139052 LH UNIVERSAL – Complete with 1 pc. 3/8 x 21/2 GR8 Bolt, Flange Nut (Uses 675 Series C&B Kit) (see below*)

#20 JM76031 1 CLUTCH INPUT SHAFT – Release, 256, 258, 259 

#20a JM87872 1 BOLT – 5/16" - 18 x 3/4", Gr 5

#20b JM9626568 1 JAM NUT – Jam, 5/16"-18

#21 JM139116 SPINDLE – LH 256 & 258 (Same Part for RH on Model 260) 

#23 JM48180 1 COVER

#23a JM88542 6 BOLT – Hex, 1/4" – 20 x 1/2", Gr 5

#23b JM80682 6 LOCK WASHER – 1/4"

#24 JM35948 SPRING – Dog, LH (RH on Model 260)  

#25 JM34030 HARDENED PIN – It's harder than GR8 Bolts! 

#26 JM139349 UNIVERSAL – Use 1pc. 5/16 x 21/2 GR8 Bolt, Flange Nut (Uses 12 Series C&B Kit) 

#30 JM39360 BEARING ASSEMBLY – 12 Series Cross and Bearing Kit 

#31 JM8047 6x22 Diamond Plate Wheel 

#31A JM32383 BOLT – Hex 1/2" – 20x13/16 GR 5 - Wheel Lug Bolt

#32 JM8065 RAKE WHEEL COMPLETE – 5.0 x 15L (select right or left from standing behind unit)

#33 JM256-258 RH Dog, Spring, Pin Kit

#34 JM256-258 LH Dog, Spring, Pin Kit 

Note: When jacking the rake up so the wheel spins freely, it should always make a “click, click” sound when you spin it in reverse. If it doesn’t, then take the wheel and hub off, and clean all the old grease out of the hub. Then check for worn-out dog, dog springs, etc.

Page 6

NH 56, 256, 258, 260 Gear Box Assembly. See Diagram for corresponding item numbers.

# 1 JM139843 GEARBOX – 256, 258, 259, includes Ref. 2-24 

#2 JM48185 SPINDLE – Shaft & Pinion 

#2a JM87053 WOODRUFF KEY – #127, 1/4" x 21/8" 

#3 JM143096 GEARBOX – Housing, 256, 258, 259 

#4 JM181991 OIL SEAL 

#5 JM36726C BEARING CONE – LM67048 China Bearing 

#6 JM36723C BEARING CUP – LM67010 China Race 

#7 JM9842737 YOKE – & Shaft 

#8 JM39360 12 SERIES CROSS BEARING KIT 

#8a JM80711 LUBE NIPPLE – 65 Degree, 1/8" NPT x 7/8" lg 

#9 JM677847 TELESCOPING SHAFT 

#9a JM88775 LUBE NIPPLE – 1/4" – 28 

#10 JM139034 BEVEL PINION – Gear 

#11 JM139047 COLLAR – Clutch 

#12 JM48176 SPRING – Clutch 

#13 JM48174 BRACKET – Stop 

#14 JM36724C BEARING CONE – LM11949 China Bearing 

#15 JM36725C BEARING CUP – LM11910 China Race 

#16 JM87381 WASHER – 0.81"ID x 1.47" OD x 0.13" Thk. 

#17 JM116311 SLOTTED NUT – 3/4" x 16 

#18 JM87395 COTTER PIN – 1/8" OD x 11/4" long

#19 JM48191 DUST CAP 

#20 JM76031 CLUTCH INPUT SHAFT – Release, 256, 258, 259 

#20a JM87872 BOLT – 5/16" - 18 x 3/4", Gr 

#20b JM9626568 JAM NUT – Jam, 5/16"-18

#21 JM48173 YOKE – Clutch 

#21a JM280112 BOLT – Hex, 1/4" – 20 x 11/2, Gr 5 

#21b JM80682 LOCK WASHER – 1/4" 

#21c JM7770 NUT – Hex, 1/4" – 20, Gr 5

#22 JM86537848 GASKET SEALANT 

#23 JM48180 COVER  Order either a flat cover or a gear bump-out cover (Used) based on your old one.

#23a JM88542 BOLT – Hex, 1/4" – 20 x 1/2", Gr 5 

#23b JM80682 LOCK WASHER – 1/4"  

#24 JM80781 PLUG – 3/8" – 18 NPT 

#24a JM8048 GEAR BOX – Bearing and Race, and Oil Seal Kit China 

#24b JM8048T GEAR BOX – Bearing and Race, and Oil Seal Kit Timken US 

#26 JM86511191 WASHER – 0.81" ID x 2" OD x 0.15" Thk 

#27 JM88886 SLOTTED NUT– 3/4" – 16   

#27a JM87395 COTTER PIN – 1/8" OD x 11/4" Long

Note: Ref. #2 JM48185 sometimes needs shimming to properly match with ref. #10 JM139034. We use China bearings and races in the gearbox. Contact us if you want Timken. Ref. #23 cover only uses gasket sealant, not a gasket. For gasket sealant, order Ref. #22. When rebuilding the gearbox, use grease pump grease only, but pack it into the front at the star before installing the last NOTES bearing, and also into the back before putting the last cover on. Fill to almost full. Check level annually!

Page 7

JM8064 Rake Tread Tire 5.00 x 15L 

JM8065 Rake Wheel Complete 5.00 x 15L  

JM80793 Expansion Plug Goes on 258 bar ends 

JM850612 256 Rubber Rake Tooth (1 Hole) Price Subject to Change 

JM850613 258 Rubber Rake Tooth (2 Holes) Price Subject to Change 

JM850614 260 Rubber Rake Tooth (2 Holes) 

JM86837895 256 Bar Dust Cap 

JM86837915 Slotted Nut On Wheel Spindle 

JM86978339 Pivot Bracket 

JM87028576 256 Rake Bar 

JM9800135 260 Bar Pin

JM9807906 260 Sealed Bar Bearing  

JM8075 NH Rake Hydraulic Lift Assembly (not pictured)

Not listed on pages JM139138A-56, 56 Rake Ball Socket Conversion Kit for 56 Rakes includes JM139141 Plate