Chicken Rollaway Egg Nesting Box 4 Compartment
Available in front or rear egg collection, this Amish-made, heavy-duty, four-compartment rollaway nesting box keeps eggs clean and safe with a PVC-coated wire-mesh floor that gently rolls eggs forward while droppings fall through to a pull-out manure tray. Built from 26- and 16-gauge galvanized steel, easy to sanitize, and designed for cleaner eggs, happier hens, and long-lasting durability.
Description / Chicken Rollaway Egg Nesting Box 4 Compartment
Upgrade your poultry setup with one of our most popular heavy-duty nest boxes—an Amish-made four-compartment rollaway egg nesting box, available in front or rear collection to match your coop layout perfectly. Built in a traditional Amish metal shop using 26- and 16-gauge galvanized steel, this nest box delivers superior durability, functionality, and sanitation compared to wooden or thin-gauge alternatives.
Clean, Safe, Efficient Egg Collection
When a hen lays her egg, it gently rolls down the PVC-coated, heavy-gauge ½” × ½” wire-mesh floor into the forward holding tray. This rollaway design prevents hens from stepping on, cracking, or pecking at the eggs. Manure falls through the mesh into a convenient pull-out tray below, eliminating the need for messy nesting mats.
Collecting eggs is effortless—lift the front cover and the eggs are lined up, clean and ready, without disturbing any nesting hens.
Easy Manure Cleanout
Manure removal is effortless on rear-collection models. Roll a wheelbarrow up to the box, slide out the manure tray beneath the egg tray, dump, and slide it back in—no reaching inside the coop and no stress to the birds.
No Nesting Material Required
These nesting boxes include a training egg and are designed to operate without nesting material, which would prevent eggs from rolling forward properly. This reduces the risk of infestation and keeps the interior cleaner. If desired, you may start with a small amount of nesting material and gradually reduce it as the hens adapt.
Built Stronger Than Competing Brands
Unlike competing rollaway boxes with plastic components, this model features all-metal construction:
-
26-gauge galvanized steel for the main structure
-
16-gauge steel for end pieces and cross supports
This heavier metal resists bending, withstands commercial use, and far outlasts thin-gauge alternatives.
Simple Installation & Easy Sanitation
Each box includes metal mounting cleats that screw into a solid wall. The nest box hangs on the cleats and can be lifted off in seconds for power washing and disinfecting. This makes it far easier to maintain compared to wooden nest boxes or permanently mounted units.
Front or Rear Collection Options
For rear collection, the box mounts backward over a wall cutout, allowing hens to enter from inside the coop while you collect eggs from the outside. Rear-collection models include:
-
A hinged door for the front-facing side
-
Additional roost brackets
-
Relocated roost bar hardware
Rear collection frees up interior coop space and provides a taller front entry ideal for larger breeds.
User-Friendly Roost Bar
The roost bar may be lifted to discourage entry when needed. On rear-collection units, the roost bar can be accessed through the hinged exterior door.
Capacity & Dimensions
One nest hole supports 5–6 hens, making four compartments suitable for most families or small flocks.
Measurements:
-
Entrance: 8” tall × 11-1/4” wide
-
Inside compartment: 14” tall × 12” wide × 11-1/2” deep
-
Overall four-compartment unit: 49” wide × 20” tall × 17” deep
When used as rear collection, the 14" tall side becomes the front entry—ideal for bigger birds.
Ships Flat – Advanced Assembly Required
Nesting boxes ship flat and require complete assembly using 3/16" and 1/4" bolts. On a 1–10 difficulty scale, most customers rate the assembly 9–10.
Helpful tips:
-
Mechanically inclined users tend to do best
-
A second set of hands is recommended for long panels
-
Edges may be sharp—wear gloves
-
Tools needed: flat-head screwdriver, adjustable wrench(es), and a hammer for lid-hinge caps
Printable instructions are available via the PDF assembly manual at the bottom of the product page.
Amish-Built & Shipped the Traditional Way
These nest boxes are handmade in a small Amish shop and shipped using their traditional UPS Logbook system rather than electronic tracking. We’ll provide an estimated ship date, and you can manually request tracking if it has not arrived within 10 days.
Also Available for Commercial Operations
If you need open-concept nest boxes without dividers or require higher-capacity rollaway systems, explore our Amish-made commercial-grade Colony Nest Boxes. These compact, efficient systems are available in both front and rear collection models and are ideal for tractors, small spaces, and larger flocks. Click Here to view all of our nest box options.
What our customers say:
"I received and assembled a roll-away nest I ordered from you today. I wanted to tell you that I am extremely pleased with the quality and workmanship of this nest. Everything bolted together perfectly and was built out of heavy gauge metal. Very impressive".
Thanks
Watch Video Below
Product Attachments
Shipping Estimator
Estimate Shipping Calculator
Note : * Required Field(s) in the drop-down box options above must be selected to obtain a shipping estimate. Alaska-Hawaii customers contact us. International Customers other than Canada, please use a US Forwarding Agent like MYUS.COM
Customer Reviews
Tim H













