Buggy Leaf Springs, 36 Inch
A popular buggy leaf spring was used to build horse-drawn buggies, wagons, and equipment. Commonly installed across axle installations, but may also be installed as a pair on each side of the vehicle.
36” x 1-1/4” W x 11” T, five-section leaf Buggy Springs. Priced as a single spring assembly; order two springs for a set.
Springs are not rated for a maximum weight capacity; rather, they are rated by the load required to compress them. At 126 lbs., the spring should be expected to compress 1”; at 246 lbs., 2”; and at 355 lbs., 3”.
Select between the 1-1/4" as priced or the 1-1/2" to see the incremental price difference.
Read more below >
Description / Buggy Leaf Springs, 36 Inch
Springs are powder-coated with a zinc-rich primer, followed by a gloss-black topcoat. This powder-coating combination has proven to be much more durable than a traditional powder-coat finish, providing better rust protection.
The installation of buggy or wagon springs and axles may not be for the novice builder, as proper alignment of spindles and wheels is very critical so that they run true and do not produce uneven wear or dangerous conditions.
We also carry the wooden spring bars, axle caps, and head blocks that will fit these springs. See pictures of the different installations and the parts used.
Click Here to see all of our carriage and buggy parts.
#3 3-1/2" Axle Clip #518
#4 Front Axle Clip #1002-1
#10 Easy Rider Head Wood Block #1010
#12 1" Clip Bar #513, 3/8" Square Nut 9830-14-ZN
#14 Spring Clip Plate #631
#15 1-1/2" x 7" Axle Clip
#17 Wooden Spring Bar #1025
#24 4" Axle Clip #519
#26 Rear Axle Clip #1003-1
#27 12" Spring Clip # 629-1
USA Amish-manufactured